*The EZ-Stylus has been designed to work with all Quilt-EZ templates. The EZ-Stylus mounts directly to the Long Arm Machine and is ready to be used in minutes. No drilling required! An easy to use handle will allow the stylus head to be raised and locked in a matter of seconds. With the stylus head raised, the operator can freehand quilt. When the templates are required again, the operator simply lowers the stylus head into the track and quilts away. Try it today!!rnrnThe Quilt-EZ laser holder attaches directly to the stylus and is used to hold your current machine laser. To be used especially with the Prodigy, HQ and Gammill machines, but of course will work with any setup. rnrn* EZ-Stylus will work with all Prodigy machines and the New Joy Frames, no adapter needed. All other machines need the corresponding adapter kit.rnrnFor Gammil machines made before 1996, the adapter and holder is required. For Gammil machines made after 1996, only the stylus is needed.rnrnPlease click to find your corresponding machine adapter kit available for purchase..
Omnigrid marking ruler is perfect for your craft needsTrio guide is made from premium quality plastic and laser cut for a smooth edgeRuler allows for easier deeper cutting of fabric layers
Omnigrid right triangle is used for creating triangles for your craft projectsGuide is made from durable acrylic plastic and is laser cut for a smooth edge Craft tool edge allows for easier, deeper cutting of fabric layers
A4(210mm X 297mm)-20 Sheets, A3(297mm X 420mm)- 20Sheets,
42cmX30M- rolls, other size is requirment.
Ink Compatibility: water based dye or pigment ink
1. Application
This product is recommended with wax crayons, Oil pastels, fluorescent markers,color pencil, Mild solvent ink, Eco-solvent ink, sublimation ink, Water based pigment or Dye inkjet ink for white, Light-colored, dark-clored T-shirts, aprons,
gift bags, mouse pads, wool garment, photographs on quilts etc. This transfer paper enables you to produce a metallic effect without using an additional metallic foil. When using HTS-300-Metallic yellow turns to gold, grey turns to silver and all other colors appear in a metallic look.
2. Advantage
?Customize Fabric with favorite photos, color graphics and with maker for painting.
?Designed for vivid results on white or light-colored, dark colored cotton or cotton/polyester blend fabrics
?Ideal for personalizing T-shirts, canvas bags, aprons, gift bags, wool garment, mouse pads, photographs on quilts etc.
?Transfer peels off easily hot or after cooling
?Iron on with a regular household iron & a professional heat press machine
3. Compatibility for Metallic ink jet Transfer Paper
It can be printed with water based inks in most printers such as:Epson Stylus Photo 1390, R270, R230, PRO 4400,Canon PIXMA ip4300, 5300, 4200, i9950, ix5000, Pro9500,HP Deskjet 1280, HP Photosmart D7168 , HP Officejet Pro K550 etc. some of color laser printers:Epson AcuLaser CX11N, C7000, C8600, Fuji Xerox DocuPrint C525 A, C3210DX, Canon laser shot LBP5600?LBP5900?LBP5500?LBP5800, Canon CLC1100?CLC1130?CLC1160?CLC5000, CanoniRC2620?3100?3200
4. Printer Recommendations
1) Store HTS-300-Metallic in its original packaging in a cool, dry place.
2) Only print onto the unprinted, coated side of transfer paper.
3) Printer settings: normal paper mode using photo quality print quality
4) Before transferring, leave the printed image to dry for approx.5 minutes, cut out the motif without leaving a margin around the edges. Straight after peel off the transfer film from the paper back.
5) First print the desired motif onto standard paper to check that the color and size are correct.
5. Transfer processing
A. Prepare a stable, heat-resistant surface suitable for ironing on.
B. Preheat the household iron to the cotton setting.
C. You can also use a heat press, set 165°C for 25 seconds using moderate pressure.
D. Briefly iron the fabric to ensure that it is completely smooth, place the transfer film (clear polyester transfer film with adhesive) or grease proof paper onto it with the printed image facing upwards.
Do not use the steam function.
Make sure that the heat is evenly transferred over the entire area.
Iron the transfer paper, applying normal pressure.
When moving the iron, less pressure should be given.
Don't forget the corners and edges.
E. Continue ironing until you have completely traced the sides of the image. This entire process should take about 60-70 seconds for an 8"x 10" image surface.
F. Peel the transfer film or greasy proof paper starting at the corner after the ironing process.
G. It is possible to use the same transfer film five times or more, if there are no ink arrears left on it.
6. Washing Instructions
1) waiting 24 hours before washing for the first time(drying time)
2) Fabrics bearing our transfers are machine-washable up to 30°C, always wash garments inside out.
3) Do not use aggressive washing detergents or bleach of any kind
4) Do not tumble-dry
5) Iron only on the reverse side.
7. Material Storage
conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.
Omnigrid marking ruler is perfect for your craft needsTrio guide is made from premium quality plastic and laser cut for a smooth edgeRuler allows for easier deeper cutting of fabric layers
Omnigrid right triangle is used for creating triangles for your craft projectsGuide is made from durable acrylic plastic and is laser cut for a smooth edge Craft tool edge allows for easier, deeper cutting of fabric layers
*The EZ-Stylus has been designed to work with all Quilt-EZ templates. The EZ-Stylus mounts directly to the Long Arm Machine and is ready to be used in minutes. No drilling required! An easy to use handle will allow the stylus head to be raised and locked in a matter of seconds. With the stylus head raised, the operator can freehand quilt. When the templates are required again, the operator simply lowers the stylus head into the track and quilts away. Try it today!!rnrnThe Quilt-EZ laser holder attaches directly to the stylus and is used to hold your current machine laser. To be used especially with the Prodigy, HQ and Gammill machines, but of course will work with any setup. rnrn* EZ-Stylus will work with all Prodigy machines and the New Joy Frames, no adapter needed. All other machines need the corresponding adapter kit.rnrnFor Gammil machines made before 1996, the adapter and holder is required. For Gammil machines made after 1996, only the stylus is needed.rnrnPlease click to find your corresponding machine adapter kit available for purchase..
